About

This class has prerequisites please see below.

This is the class you want to take for your first time at a metal-cutting vertical mill. You’ll gain an understanding of the three principle motions of the table in the X-, Y-, and Z-axes, how to make use of the DRO (Digital Read Out), how to control the speed of the spindle, using collets, and the different cutters used. You will also practice layout, using the cut off saw, ”finding” an edge, facing and squaring on the mill, drilling, tapping, and filing a chamfer. This class dovetails with Make A Bolt (Intro to the Lathe) because the bolt you make will thread into the nut you’ll make in this class.

This class is suitable both as a beginning class and for those who are fairly new to the shop and wish to gain experience.

You will not only get a chance to gain confidence in using our shop tools, but have a lovely square nut that spins freely on the bolt you’ll create in the Make A Bolt class, an introduction to the lathe.

Details:

• Prerequisites: Machine Shop Orientation
  
• Please wear closed-toe shoes in our studio. Tie back long hair, avoid loose-fitting clothing and jewelry and roll up sleeves. Wear hearing protectors when warranted and safety glasses; bring your own or use BARN's.

• Please click here for BARN's current COVID-19 health & safety protocols. 

• BARN is committed to accessibility. Tuition Assistance is available - click here to fill out the simple application before registering for a class. For those who might need physical assistance, please learn about BARN's Companion Program here.

Teacher Bio: 

Bob Mathisrud. Bob was cross trained in many trades as a stationary operating engineer, for over 20 years. 

Contact: David Hays metal.lead@bainbridgebarn.org