About

This class is now scheduled to take place on January 3rd. 

*Prerequisites required for this class. Please see below.

The Manufacturing section of Fusion 360 is an essential element of using BARN’s CNC machines. In this class, you’ll learn about:

• Setup (Machine), Stock, and Post Processor tabs of Setups in Fusion 360's Manufacturing section.
• The various Mill and Turn (lathe) operations available, and when to use them.
• Details of Tool Library locations, importing into your Fusion application, and their relationship to the tools in the CNC machines.
• Post Processors, what they are, where to find them, how to import them, and how they are used.

Knowing how to utilize the CAM functions is a big step toward using BARN's CNC machines and is required to produce usable g-code from a Fusion 360 model. 

Prerequisites

• Fusion 360 competency.
• Please note this class is required for the second session of either Introduction to CNC Mill or Introduction to CNC Lathe two-session classes.

Details

• Please wear closed-toe shoes in our studio. Tie back long hair, avoid loose-fitting clothing and jewelry and roll up sleeves. Wear hearing protectors when warranted and safety glasses; bring your own or use BARN's.

• Please click here for BARN's current COVID-19 health & safety protocols. 

• BARN is committed to accessibility. Tuition Assistance is available - click here to fill out the simple application before registering for a class. For those who might need physical assistance, please learn about BARN's Companion Program here.

Instructor

As a young man, David Hays worked as a machinist while gaining his engineering degrees and went on in his later years to create his own hobby machine shop that included a DIY CNC mill.

Contact: David Hays david@haysys.com